Model: AMM-600
Test AC and DC voltage, resistance, capacitance, frequency, diode, duty cycle, continuity, automatic current input detection, live testing, non-contact voltage detection (NCV)
Provides maximum/minimum/average readings, relative measurements
CAT III 600 V, Class 2, double insulation safety rating
Backlit display for low light environments...
Model: JIC-685
High leverage design for heavy duty use in construction and maintenance work and cutting bolts, nails, and many gauges of wire including high strength wire.
Cross hatched knurled jaws to ensure a tight grip and rivet design to ensure smooth movement and eliminate side-play.
Fish tape pulling feature can easily pull 1/8” to 1/4” steel fish...
Model: JIC-683
Easily cuts bolts, nails, ACSR and many gauges of high-strength wire
Cross-knurled jaws for a secure grip
Rivet design ensures smooth movement
Thick plastic dipped handle (approximately 0.07 inches) for increased comfort and reduced vibration while cutting
Model: FPM-50S
It measures power using a wide range of wavelengths from 800 to 1650 nm, with a resolution as low as 0.01 dB.
Measures 10 preset calibrated wavelengths with high precision to determine absolute or relative power
The LED display is backlit for viewing in low-light locations, and a 10-minute auto shut-off helps preserve battery life....
Model: CBF-100
Trace an outlet to its individual circuit breaker.
Manually adjustable sensitivity makes finding a switch quick and easy.
Easy-to-read lights make fault determination easy
Durable hard case designed to withstand a drop from 2 m (6.6 ft)
Nominal Voltage: 110/125V AC at 50/60Hz on 3-wire outlet
Works on GFCI outlets and confirms ground...
Model: GFC-1
GFCI tester detects the most common wiring problems in standard and GFCI receptacles
Works on GFCI outlets and confirms ground fault protection device operation.
Durable hard case designed to withstand a drop from 2 m (6.6 ft)
Nominal Voltage: 110/125V AC at 50/60Hz on 3-wire outlet
Easy-to-read lights make fault determination easy
Built-in...
Model: BCOMB
Gripping teeth machined into the jaws to provide a non-slip grip.
Two jaw positions with smooth, positive interlock between halves for comfort and versatility.
Ergonomically designed handle with dipped plastic grip for comfort and torque.
This product is not for use on ACSR or other steel cables.
Side cutting blades in jaws cut wire with ease
Model: MAG-100
Instantly magnetizes or demagnetizes steel tools and other small metal objects.
Turns any metal tool into a magnetic retriever, ideal for picking up screws, nuts and other small metal objects.
The wide openings allow a variety of tools and objects to be magnetized.
The compact and sturdy design makes it perfect for any tool bag or...
Model: TK-19
This product is a repair tool kit for opening and repairing all series of smartphones and tablets including iPhone, Android, iPad, iMac, MacBook, Dell XPS, and many more.
This kit contains all the tools you need to take apart these highly specialized electronic devices and also repair or replace broken screens.
It for perfect for DIY...
Model: FIM-400
The Jonard Fiber Inspection Microscope has 400x magnification, a focusing wheel, and features 2.5mm (FC/SC/ST) and 1.25mm (LC) adapters for use in most connectors. of fiber. The microscope also includes the following:
Achromatic lens delivers excellent images and built-in laser filters provide a safe experience (not intended for use with...
Model: UAC-T122-AF28-W
2MP high quality imaging
TVI/AHD/CVI/CVBS
Supports white light illumination, 24/7 color images
Supports 180° horizontal flip, 180° vertical flip
OSD configuration menu, easy to operate
IP67 waterproof and dustproof design, high reliability
OSD configuration menu in 11 languages
Built-in microphone for high quality audio...
Model: TL-MC110CS
Complies with 802.3u 10/100Base-TX, 100Base-FX standards
Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
Ranges up to 20km (12.4 miles) transmission distance with 9/125 μm single-mode fiber
Model: TL-SF1008D
9× 10/100 Mbps RJ45 ports
8× PoE+ ports transfer data and power on individual cables
Works with IEEE 802.3af/at compliant PDs
Supports PoE Power up to 30 W for each PoE port
Supports PoE Power up to 65 W for 8 PoE ports*
Up to 250 m data and power transmitting range under Extend Mode**
Priority Mode ensures high priority of ports 1–2 to...
Model: TL-SF1008D
PLUG-AND-PLAY - Easy setup with no configuration or no software needed
ETHERNET SPLITTER - Connectivity to your router or modem router for additional wired connections (laptop, gaming console, printer, etc)
8 Port FAST ETHERNET - 8 10/100 Mbps Fast Ethernet auto-negotiation RJ45 ports greatly expand network capacity
COST EFFECTIVE -...
Model: TL-EP10P2
Voice Control: Enjoy the hands free convenience of controlling any home electronic appliances with Google Assistant or Alexa.
Auto-off Timer: Set a timer to turn on or off your connected device automatically as needed.
Smart Schedules: Creat an automated schedule for your to turn your connected electrical devices on or off.
Remoto...
Model: TL-SF1016D
16 10/100Mbps Auto-Negotiation RJ45 ports, Supports Auto MDI / MDIX
Green Ethernet technology saves power consumption
IEEE 802.3x flow control provides reliable data transfer
Plastic case, desktop or wall-mounting design
Plug and play, no configuration required
Model: TL-MC200CM
1 10/100/1000Mbps Auto-Negotiation RJ45 port supporting Auto-MDI/MDIX
Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
Complies with IEEE 802.3ab and IEEE 802.3z
Extends fiber distance up to 1,800 feet (550m)
Model: TL-SM311LM
Multi-mode MiniGBIC module
Compatible with all SFP ports on TP-Link product including JetStream switches, and media converter MC220L.
Work with MC200CM with a multi-mode fiber connection
Up to 550m range with 50/125 μm multi-mode fiber
Up to 275m range with 62.5/125 μm multi-mode fiber
Model: TL-SF1024D
24 10/100M RJ45 ports.
Innovative energy-efficient technology saves power up to 75%
Supports MAC address self-learning and auto MDI/MDIX.
Standard 13-inch steel case.
Model: TL-MC210CS
1× 10/100/1000Mbps Auto-Negotiation RJ45 port supporting Auto-MDI/MDIX
Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
Complies with IEEE 802.3ab and IEEE 802.3z
Extends fiber distance up to 20km
Model: TL-WDN4200
Dual Band connections for lag-free HD video streaming and gaming
Maximum speed up to 2.4GHz 450Mbps and 5GHz 450Mbps
Easy wireless security encryption at a push of the WPS button
Model: TL-SM321B
WDM Bi-Directional SFP Module
Supports WDM Bi-Directional technology, using a single strand of fiber, cost saving
Pairing with TL-SM321A or MC111CS
Compatible with T3700 series, T2700 series, T2600 series, T2500 series, T1700 series, T1600 series, T1500 series, 2/3/5 series switches and MC220L